Carcinogenic:
OSHA = no NTP = no IARC = no
SECTION
III - PHYSICAL DATA
COLOR:
Milky white PHYSICAL FORM: Viscous liquid
NON-VOLATILE
(weight): 52-59% ODOR: Characteristic
FREEZING
POINT: N.E. BOILING RANGE: N.E.
pH: N.A. MELTING
RANGE: N.A.
EVAPORATION
RATE: N.E. VAPOR DENSITY: N.E.
VAPOR PRESSURE:
N.E.
DENSITY:
11.5-11.8 lb/gal (1.38-1.42 kg/l)
SECTION
IV - FIRE AND EXPLOSION DATA
HMIS
FLAMMABILITY RATING: 1
FLASH
POINT: None
FLAMMABLE
LIMITS: LEL: N.E. UEL: N.E.
EXTINGUISHING
MEDIA: Water, carbon dioxide or other dry chemical fire fighting agents.
UNUSUAL
FIRE AND EXPLOSION HAZARDS: None
SPECIAL
FIRE FIGHTING PROCEDURES: Firefighters should wear self-contained breathing
apparatus.
SECTION
V - HEALTH HAZARD DATA
EMERGENCY
AND FIRST AID PROCEDURES:
Eye
Contact: Flush eyes with water for at least 15 minutes. Consult
a physician. Skin Contact: Wash affected area with soap and water.
If irritation persists, consult a physician. Inhalation: Remove
to an uncontaminated area, administer oxygen if necessary. If victim
has stopped breathing begin CPR. Get medical attention. Ingestion:
If conscious, give water or milk and drink.
MEDICAL
CONDITIONS PRONE TO AGGRAVATION BY
EXPOSURE:
None known.
PRIMARY
ROUTES OF ENTRY: Inhalation, skin and eye contact and skin absorption.
HEALTH
HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:
1. Repeated
or prolonged skin contact with this material can be slightly irritating
for skin.
2. Eye
contact with this material causes irritation.
3. Excessive
inhalation of high vapor concentrations may irritate the upper respiratory
tract. If the product is sprayed or atomized, inhalation of particle
mists may irritate the upper respiratory tract and should be avoided.
- Ingestion
of this product is expected to be harmful.
SECTION
VI - REACTIVITY DATA
STABILITY:
Stable
HAZARDOUS
POLYMERIZATION: Will not occur.
HAZARDOUS
DECOMPOSITION PRODUCTS: Oxides of carbon and nitrogen.
INCOMPATIBILITY:
Strong acids, alkalis and oxidizing agents.
CONDITIONS
TO AVOID: Contact with incompatible materials.
SECTION
VII - SPILL OR LEAK PROCEDURES
STEPS
TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping
compound or other absorbent material. Keep out of streams or waterways.
WASTE
DISPOSAL: Incinerate or dispose of in accordance with existing Federal,
State and Local environmental regulations.
SECTION
VIII - SAFE HANDLING AND USE INFORMATION
RESPIRATORY
PROTECTION: A respirator would not be required for open areas (not confined)
with adequate ventilation when spraying. Adequate ventilation would
include "the outdoors" or any "indoor environment" with controlled temperature
systems that used forced air with high bays or other similar conditions.
A dust/mist respirator to remove particle mists.
PROTECTIVE
GLOVES: Chemical resistant rubber or plastic.
EYE
PROTECTION: Safety goggles.
OTHER
PROTECTIVE EQUIPMENT: Eye wash station.
SECTION
IX - SPECIAL PRECAUTIONS AND STORAGE DATA
PRECAUTIONS
TO BE TAKEN IN HANDLING: Avoid eye and skin contact. Avoid excessive
inhalation of vapors and/or particle mists. Use in a well-ventilated
environment.
PRECAUTIONS
TO BE TAKEN IN STORING: Keep product from freezing, store at 40ºF
(4ºC) or above. Keep away form heat or open flame.
SECTION
X - SHIPPING DATA
DOT/IMDG/IATA
SHIPPING NAME: N.A.
UN/NA
NUMBER: N.A.
DOT/IMDG/IATA
HAZARD CLASS.: N.A.
T.S.C.A.
STATUS: Listed
DOT/IMDG/IATA
REQUIRED LABELS: N.A.
TECHNICAL
SHIPPING NAME: N.A.
PREPARED
BY: Brian Wuertz, Tech Service Engineer
APPROVED
BY: Margarita Kharshan, Lab Director
DATE
PREPARED: 11/19/02 SUPERSEDES: 4/10/01
DISCLAIMER:
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of the Cortec Corporation.
The data on this sheet relates only to the specific material designated
herein. The Cortec Corporation assumes no legal responsibility for use
or reliance upon this data.
N.E.
= NOT ESTABLISHED N.A. = NOT APPLICABLE
